Perfect for installing an effluent filter or pump outside the tank, or just as a drainage well. These watertight basins are made out of High Density Polyethylene so they won’t breakdown in the harsh septic environment. They come custom made in any 6” height and we guarantee they will be watertight!
- Can customize height to any 6” increment, beginning with a 14” basin
- Made of high density non-corrosive polyethylene plastic
- Accepts all 2'', 3'', 4'', SDR 35, SCHD. 40 & corrugated pipe
- Ideal for retrofitting an effluent filter or pump to an existing onsite system
- Includes an inlet and outlet grommet
- Watertight and airtight
- Ideal for repairs on sites with limited space
- 3008-CUS26 (Basin Assembly 24" x 26")
- 3008-CUS38 (Basin Assembly 24" x 38")
- 3008-CUS44 (Basin Assembly 24" x 44")
- 3008-CUS50 (Basin Assembly 24" x 50")
- 3008-CUS56 (Basin Assembly 24" x 56")
- 3008-CUS62 (Basin Assembly 24" x 62")
Low Profile Basins, with Filter & Cover
Polylok’s new low profile external filter basin is ideal for those situations where space limitations are a factor.
Pre-Assembled Pump Basin
Tired of assembling your own pump basins? You don’t have to! Polylok now offers a pre-assembled pump basin that includes everything you need from the effluent pump to the heavy duty cover. This all inclusive unit comes ready to hook-up. It is made of high density polyethylene and is light weight, compact and ready for installation.
Goes Well With
20" x 12" Risers
The best just got better. You asked for it and now we have it. Polylok is proud to introduce our 1 foot tall by 20" riser. It has the same high quality as our 6" tall by 20" risers, but with fewer screws that you and your customers have to put together. Structural ribs inside prevent frost from adhering to the riser in frost prone areas.
24" Flat Cover for Risers and Corrugated Pipe
Our 24” Flat Cover fits Polylok Risers and Corrugated or ribbed pipe. These 24” flat covers are made of HDPE with the highest UV Protection on the market today. Every cover comes with a factory-installed gasket. These covers will withstand normal residential and light commercial traffic. This cover can be also used with our 24” Basins.
24" Heavy Duty Cover for Risers and Corrugated Pipe
Our 24” Heavy Duty Cover fits Polylok Risers and Corrugated or ribbed pipe. These 24” heavy duty covers are made of HDPE with the highest UV Protection on the market today. They have been tested up to 5,000 lbs. Every cover comes with a factory-installed gasket. These covers will withstand normal residential and light commercial traffic. This cover can be also used with our 24” Basins.
24" Heavy Duty Grate for Risers and Corrugated Pipe
Many of our customers asked for heavy duty riser grates that can work with either Polylok risers or U.S. and Canadian (IPEX) corrugated pipe. Our engineers developed 24” Heavy Duty Grates that will do just that. As with all of our riser products, we use the highest UV package available. These grates have been installed at golf courses, homes and businesses.
24" Riser Cover
Ideal for use with 24” Risers. Our 24” covers are made of HDPE with the highest UV Protection on the market today. These covers will withstand normal residential traffic.
24" x 12" Risers
The best just got better. You asked for it and now we have it. Polylok is proud to introduce our 1 foot tall by 24" riser. It has the same high quality as our 6" tall by 24" risers, but with fewer screws that you and your customers have to put together. Structural ribs inside prevent frost from adhering to the riser in frost prone areas.
U.S. Patent No# 6,655,093; 6,454,491; 6,877,281
24" x 6" Risers
Like our 20" riser, we have combined all the best features of concrete and plastic risers to create our patented riser system. Our risers hold their shape, are stackable, screw together, and are water and airtight. Structural ribs inside prevent frost from adhering to the riser in frost prone areas.
U.S. Patent No# 6,655,093; 6,688,072; 6,484,451; 6,877,281
Best GF10 Filter
The Best Filter is a great addition to the Polylok PL-525 effluent filter family. The GF10 Filter is 10" x 18" and is available in three filtration designs: 1/8", 1/16" and 1/32". The exterior of the GF10 filter is a single-piece case. It has no joints and no glue holding it together which gives it incredible strength. It is made of impact-resistant PVC so it can withstand harsh treatment and it won't break!
Simplex, Duplex, Time Dose, Nema 1 indoor and Nema 4x outdoor available.
Common applications include pump chambers, sump pump basins, irrigation systems and lift stations.
Effluent Pumps (3.4" Solids)
The Polylok™ pumps are available in 4/10 and 1/2 HP sizes, including both effluent and sewage ejector models. These pumps are designed from the ground up to deliver the dependable service and long life expected from any product bearing the Polylok™ name. They include all the features required for residential and light commercial applications, as well as several features not normally found in pumps of this size.
Float Switches & Accessories
Piggyback Mechanical Pump switches provide automatic pump control.
Control switches accurately monitor liquid levels to activate pump control panels and alarms.
Grinder Pumps (Mascerate Solids)
Residential grinder pump for use in the pumping of domestic sewage. Applications include residential sewage systems, on-site sewage and effluent systems, and low pressure dosing systems.
When a friction fit is important, you can count on the Polylok Grommet. Our grommets are available in a variety of sizes and are used to ensure a watertight seal. Polylok Grommets instantly provide a water and vapor seal on either curved or flat surfaces!
High Head Multi-Stage Submersible Effluent Pumps
These 4" submersible filtered effluent pumps in 10, 20, and 30 GPM models offer dependable performance and value for high pressure filtered effluent applications. Capable of handling "dry run" conditions where other manufacturers fail. These filtered effluent pumps can be used in residential, commercial, and agricultural applications.
Indoor - Outdoor Tank Alert, with Control Block
This alarm system monitors liquid levels in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, and other non-potable water applications. The Tank Alert XT indoor/outdoor alarm can serve as a high or low level alarm depending on the float switch model used. The alarm horn sounds and red beacon illuminates when a potentially threatening liquid level condition occurs. A "power on" light switch indicates power to the alarm panel.
Indoor Tank Alert
This alarm system monitors liquid levels in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, and other water applications. The Tank Alert AB alarm system can serve as a high or low level alarm depending on the float switch model used.
Junction boxes seal electrical components from moisture and other elements. They provide a convenient location to connect all wiring required for a typical pumping station, on-site system or other electrical installation.
PL-122 Effluent Filter
The PL-122 was the original Polylok filter. It was the first filter on the market with an automatic shut-off ball installed with every filter. When the filter is removed for regular servicing, the ball will float up and prevent any solids from leaving the tank. Our patented design cannot be duplicated. Ideal for residential waste flows up to 3,000 gallons per day (GPD).
PL-525 Effluent Filter
The PL-525 Effluent Filter is rated for 10,000 GPD (gallons per day) making it one of the largest filters in its class. It has 525 linear feet of 1/16” filtration slots. Like the Polylok PL-122, the Polylok PL-525 has an automatic shut-off ball installed with every filter. When the filter is removed for cleaning, the ball will float up and temporarily shut off the system so solids won’t leave the tank.
PL-625 Effluent Filter
The PL-625 filter is ideal for grease trap applications. The 1/32” filtration has been shown to reduce fats, oils, and grease (FOG) by as much as 60% to 98%! The filter may be used in onsite wastewater systems that require a finer level of TSS removal. Whatever the application, Polylok has the filter for you!
PL-68 Effluent Filter
The PL-68 is much more than just an effluent filter. The housing can also be used as an inlet baffle (tee) or, with any 4” outlet septic tank filter. The housing is designed to accept Polylok’s snap in gas deflector to deflect gas bubbles away from the tee and to keep the solids in the tank. The PL-68 is ideal for residential waste flows up to 800 GPD.
Sewage Pumps (2" Solids)
Rugged, cast iron submersible 4/10 and 1/2 horsepower pumps for residential and light commercial wastewater applications.
These pumps have been designed for pumping clear and wastewater from house, garden or yard, and are supplied with built-in level control and check valve. The pump and motor section form a pressure-tight encapsulated unit, fully flood-proof, with motor housing constructed from corrosion resistant material, and the outer jacket and impeller of durable plastics. The unique hand/auto switch makes the pump suitable for manual or automatic operation.
Zabel A100, A300, A600™-12 Series
The original Zabel® Disc Dam Filter was patented in 1959. The 12” series filters have been filtering wastewater longer than any other filter in the wastewater industry. In 2000 Zabel made the best even better by introducing a complete redesign of the original with more great features and finer levels of filtration. In 2006, Polylok, Inc. purchased the Zabel filter line and with the benefit of our in house engineering department, we are continuing to improve the product line.
Zabel A100, A300, A600™-8 Series
A smaller version of the original Zabel® Disc Dam Filter, the A100/ 300/ 600 - 8 Series is becoming a popular choice for applications where increased effluent quality is desired.
Zabel A1800 ™ Series
Like the PL-68, this filter was designed for residential applications. The cartridge design allows for easy installation and maintenance and comes with our standard baffle (tee). All A1800 Series filters feature a locking tab that securely locks the filter into the tee. With 1/16” filtration, this filter is available in 18” and 22” lengths. The 22” A1800 comes with a built in gas deflector.