Gas Deflector for PL-68 Tee
This gas deflector is designed to be used with our PL-68 Tee. It will prevent rising gas bubbles that carry tiny solid particles from leaving the outlet pipe and entering the septic tank field. It just snaps into the bottom of the tee and that’s it.
- Snaps onto PL-68 Tee/Baffle
- Deflects suspended solids from exiting the spectic tank
- Reduces clogging at the soil-stone interface
- Easy installation, no parts to maintain
- 3025 (Gas Deflector for PL-68 Housing - red)
Gas Deflector for Polylok Baffle
Designed to be used with The Original Polylok Baffle. This gas deflector simply snaps onto our baffle with no screws or additional parts. This simple installation will save you time and labor.
U.S. Patent No# 4,832,846 & D317,812
Gas Deflector for SCHD 40 and SDR 35 Pipe
Our Gas Deflectors can be attached to any piece of pipe making it extremely versatile. Unlike our competition, our Gas Deflectors will not fall off during tank servicing.
PL-68 Sanitary Baffles Tees
Baffles tees can be used on either the inlet or outlet of the septic tank. Our baffle tees accept 3'' & 4'' SCHD 40 or SDR 35 pipe. They are easy to install, and accepts most 4'' effluent filters on the market today.
The Original Polylok Baffle deflects suspended solids from exiting the septic tank. Installs in minutes when using the Polylok Baffle Ready Seal. At 38” in length it can be cut to different heights to eliminate waste. Don’t be fooled by imitations! U.S. Patent No# 4,832,846 & D317,812
Versa-Tee accepts SDR35 & SCH40 pipe sizes, simplifying installations and inventories. May be used on both the inlet and outlet of poly and concrete septic tanks. Constructed of high quality PVC plastic.
Zabel Versa Baffles Tees™ with SCH40 Extension
Baffles Versa-Tees accepts SDR35 & SCH40 outlet pipe sizes, simplifying installations and inventories. Pre-assembled Versa-Tees Baffles reduce time & labor. May be used on both the inlet and outlet of poly and concrete septic tanks.Baffles tees are constructed of high quality PVC plastic
Zabel Versa-Tee™ Baffle with SDR 35 Extension
Versa-Tee accepts SDR35 & SCH40 outlet pipe sizes, simplifying installations and inventories. Pre-assembled Versa-Tee Baffles reduce time & labor. May be used on both the inlet and outlet of poly and concrete septic tanks. Constructed of high quality PVC plastic.
Goes Well With
PL-68 Effluent Filter
The PL-68 is much more than just an effluent filter. The housing can also be used as an inlet baffle (tee) or, with any 4” outlet septic tank filter. The housing is designed to accept Polylok’s snap in gas deflector to deflect gas bubbles away from the tee and to keep the solids in the tank. The PL-68 is ideal for residential waste flows up to 800 GPD.