Gas Deflector for Polylok Baffle

Designed to be used with The Original Polylok Baffle. This gas deflector simply snaps onto our baffle with no screws or additional parts. This simple installation will save you time and labor.

U.S. Patent No# 4,832,846 & D317,812

Features

  • Gas deflector snaps onto baffle
  • Deflects suspended solids from exiting the septic tank
  • Increases quality of the effluent
  • Reduces clogging at the soil-stone interface
  • Easy installation, no parts to maintain or clean
  • Saves time and labor

Downloads

Part Number

  • 3023 (Gas Deflector for Polylok Baffle System - yellow)

Similar Products

Gas Deflector for PL-68 Tee

This gas deflector is designed to be used with our PL-68 Tee. It will prevent rising gas bubbles that carry tiny solid particles from leaving the outlet pipe and entering the septic tank field. It just snaps into the bottom of the tee and that’s it.

Gas Deflector for SCHD 40 and SDR 35 Pipe

Our Gas Deflectors can be attached to any piece of pipe making it extremely versatile. Unlike our competition, our Gas Deflectors will not fall off during tank servicing.

PL-68 Sanitary Baffles Tees

Baffles tees can be used on either the inlet or outlet of the septic tank. Our baffle tees accept 3'' & 4'' SCHD 40 or SDR 35 pipe. They are easy to install, and accepts most 4'' effluent filters on the market today.

Polylok Baffle

The Original Polylok Baffle deflects suspended solids from exiting the septic tank. Installs in minutes when using the Polylok Baffle Ready Seal. At 38” in length it can be cut to different heights to eliminate waste. Don’t be fooled by imitations! U.S. Patent No# 4,832,846 & D317,812

Zabel Versa-Tee™

Versa-Tee accepts SDR35 & SCH40 pipe sizes, simplifying installations and inventories. May be used on both the inlet and outlet of poly and concrete septic tanks. Constructed of high quality PVC plastic.

Zabel Versa Baffles Tees™ with SCH40 Extension

Baffles Versa-Tees accepts SDR35 & SCH40 outlet pipe sizes, simplifying installations and inventories. Pre-assembled Versa-Tees Baffles reduce time & labor. May be used on both the inlet and outlet of poly and concrete septic tanks.Baffles tees are constructed of high quality PVC plastic

Zabel Versa-Tee™ Baffle with SDR 35 Extension

Versa-Tee accepts SDR35 & SCH40 outlet pipe sizes, simplifying installations and inventories. Pre-assembled Versa-Tee Baffles reduce time & labor. May be used on both the inlet and outlet of poly and concrete septic tanks. Constructed of high quality PVC plastic.

Goes Well With

Baffle and Filter Ready Seal System

This seal gives you all the features of the Poly I Pipe Seal but also allows you to install the Polylok Baffle and Polylok PL-122 Effluent without drilling. It will save you and your customers time and money!

U.S. Patent No# 5,286,040

Polylok Baffle

The Original Polylok Baffle deflects suspended solids from exiting the septic tank. Installs in minutes when using the Polylok Baffle Ready Seal. At 38” in length it can be cut to different heights to eliminate waste. Don’t be fooled by imitations! U.S. Patent No# 4,832,846 & D317,812