High Head Multi-Stage Submersible Effluent Pumps
These 4" submersible filtered effluent pumps in 10, 20, and 30 GPM models offer dependable performance and value for high pressure filtered effluent applications. Capable of handling "dry run" conditions where other manufacturers fail. These filtered effluent pumps can be used in residential, commercial, and agricultural applications.
- Shell: Stainless steel
- Discharge: 10, 20, and 30 GPM models:
- Fiberglass-reinforced thermoplastic; 50 GPM models: Stainless steel
- Discharge Bearing: Nylatron
- Impellers: Derlin
- Diffusers: Polycarbonate
- Suction Caps: Polycarbonate with stainless steel wear ring
- Thrust Pads: Proprietary spec.
- Shaft & Coupling: Stainless steel 300 grade Intake: Fiberglass-reinforced thermoplastic Intake Screen: Polypropylene Jacketed Cord: 300V "SOOW" jacketed Cord 10' leads (2 wire with ground); optional 20', 30' 50' and 100' lengths available.
- PL-TE-10 (1/2 HP, High Head Effluent Pump, 115 Volt, 1 1/4" NPT Discharge)
- PL-TE-20 (1/2 HP, High Head Effluent Pump, 115 Volt, 1 1/4" NPT Discharge)
- PL-TE-30 (1/2 HP, High Head Effluent Pump, 115 Volt, 1 1/4" NPT Discharge)
These pumps have been designed for pumping clear and wastewater from house, garden or yard, and are supplied with built-in level control and check valve. The pump and motor section form a pressure-tight encapsulated unit, fully flood-proof, with motor housing constructed from corrosion resistant material, and the outer jacket and impeller of durable plastics. The unique hand/auto switch makes the pump suitable for manual or automatic operation.
Effluent Pumps (3.4" Solids)
The Polylok™ pumps are available in 4/10 and 1/2 HP sizes, including both effluent and sewage ejector models. These pumps are designed from the ground up to deliver the dependable service and long life expected from any product bearing the Polylok™ name. They include all the features required for residential and light commercial applications, as well as several features not normally found in pumps of this size.
Sewage Pumps (2" Solids)
Rugged, cast iron submersible 4/10 and 1/2 horsepower pumps for residential and light commercial wastewater applications.
Goes Well With
Filter Alarm Panel and SmartFilter™ Control Switch
The Polylok™ filter alarm panel and switch provides a visual and audible notification of impending filter and tank servicing. Our Patented SmartFIlter™ control switch attaches to Most Polylok™ Filters and All Zabel & Best Filters. The filter alarm switch activates when the filter cartridge is near capacity on solids that have built up through the filtering process. The filter alarm switch sends a signal to the alarm panel activating the septic tank alarm. The owner will need to call a local septic service company for immediate service.
Indoor - Outdoor Tank Alert, with Control Block
This alarm system monitors liquid levels in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, and other non-potable water applications. The Tank Alert XT indoor/outdoor alarm can serve as a high or low level alarm depending on the float switch model used. The alarm horn sounds and red beacon illuminates when a potentially threatening liquid level condition occurs. A "power on" light switch indicates power to the alarm panel.
Pre-Assembled Pump Basin
Tired of assembling your own pump basins? You don’t have to! Polylok now offers a pre-assembled pump basin that includes everything you need from the effluent pump to the heavy duty cover. This all inclusive unit comes ready to hook-up. It is made of high density polyethylene and is light weight, compact and ready for installation.
High Pressure Filter
Polylok’s high pressure filter is perfect in difficult drainage environments, where you want to spread the effluent out as much as possible to ensure you do not clog your media, this filter will act as a second level of filtration and will keep orifice lines clean.
Simplex, Duplex, Time Dose, Nema 1 indoor and Nema 4x outdoor available.
Common applications include pump chambers, sump pump basins, irrigation systems and lift stations.
Junction boxes seal electrical components from moisture and other elements. They provide a convenient location to connect all wiring required for a typical pumping station, on-site system or other electrical installation.
Float Switches & Accessories
Piggyback Mechanical Pump switches provide automatic pump control.
Control switches accurately monitor liquid levels to activate pump control panels and alarms.
Perfect for installing an effluent filter or pump outside the tank, or just as a drainage well. These watertight basins are made out of High Density Polyethylene so they won’t breakdown in the harsh septic environment. They come custom made in any 6” height and we guarantee they will be watertight!