High Pressure Filter

Polylok’s high pressure filter is perfect in difficult drainage environments, where you want to spread the effluent out as much as possible to ensure you do not clog your media, this filter will act as a second level of filtration and will keep orifice lines clean.

Features

  • Mounts directly onto the discharge end of any pump. No extra plumbing is necessary!
  • Filters available in heavy duty stainless steel or reinforced plastic. Filters can use a 300 micron sock for fine filtration.
  • Twist & Lok cover provides both watertightness and easy access for filter maintenance.
  • Extension handle is available for deep installations.

Part Number

  • 3014-PF (Pressure Filter Stainless)
  • 3014-PFP (Pressure Filter Plastic)
  • 3014-W (Handle with Pipe)
  • 3014-WK (Handle with No Pipe)
  • 3014-Sock (600 Micron Sock)
  • 3014-CAP (Cap)

Similar Products

Goes Well With

Orifice Diffuser

Polylok’s Orifice Diffuser ensures even distribution on lateral piping from all orifices in any system by separating the discharge orifice from the drain media; which effectively protects the system. Because of low pressure in most wastewater systems, typically 1-3 psi, it is extremely important to assure drainage media does not interfere with the discharge orifices. Systems should be designed with the use of an orifice diffuser on all discharge holes to assure even distribution and even system pressure after back-filling.

Patent Pending

Hydro Shield (1", 1.25", & 1.5")

The Hydro Shield is a practical solution for protecting pressure distribution field pipes from external contamination. The unique, patent pending design offers a wide range of benefits and will accommodate 3 sizes of pipe.

Hydro Shield (1", 1.5", & 2")

Prevent clogged drainage holes with the easy to install, and inexpensive Hydro Shield!

The Hydro Shield is a practical solution for protecting pressure distribution field pipes from external contamination. The unique, patent pending design offers a wide range of benefits and will accommodate 3 sizes of pipe.

Effluent Pumps (3.4" Solids)

The Polylok™ pumps are available in 4/10 and 1/2 HP sizes, including both effluent and sewage ejector models. These pumps are designed from the ground up to deliver the dependable service and long life expected from any product bearing the Polylok™ name. They include all the features required for residential and light commercial applications, as well as several features not normally found in pumps of this size.

High Head Multi-Stage Submersible Effluent Pumps

These 4" submersible filtered effluent pumps in 10, 20, and 30 GPM models offer dependable performance and value for high pressure filtered effluent applications. Capable of handling "dry run" conditions where other manufacturers fail. These filtered effluent pumps can be used in residential, commercial, and agricultural applications.

Custom Basins

Perfect for installing an effluent filter or pump outside the tank, or just as a drainage well. These watertight basins are made out of High Density Polyethylene so they won’t breakdown in the harsh septic environment. They come custom made in any 6” height and we guarantee they will be watertight!