Poly Plate (Outrigger Pad)

These super tough cribbing plates from Polylok give you stable footing on less than perfect ground conditions. Poly Plates have a 1" lip around the outside edge to stop the outriggers from sliding off. Our Poly Plates come in 24" & 30" diameter, and is recommended that the Poly Plate surface area be at least 3 times larger than surface area of the outrigger float pad. Poly Plates are not to be used to bridge across ditches or culverts. Stop using homemade wooden pads that rot over a short period of time, and switch to Polylok's Poly Plates for ease of use and durability.

Features

  • Lightweight (24" = 21 lbs. & 30" = 34 lbs.)
  • Highly Visible
  • Stackable
  • Impact Resistant
  • Textured Surface
  • Rope Handles
  • Available in 24" & 30" Diameter

Specifications

Part Number

  • 3078-PP24 (24")
  • 3078-PP30 (30")

Similar Products

Shims

Polylok Shims are made of engineered plastic specifically formulated for use by the precast industry. This material provides optimum performance for applications where high compressive strength and load bearing are important. Available in: 1/16", 1/8", 3/16", 3/8".

Corner Guard

The Corner Guard is Polylok's innovative product for securing precast products for safe delivery to the site. It's features make it the most versatile corner guard ever built!

Bearing Pads - Concrete Panel Spacers

Polylok, Inc. has developed an innovative concrete panel spacers pad that offers many improved features at a lower cost. Through our innovative design, Polylok eliminated many problems common with other concrete spacers pads. Primary applications for spacers pads are architectural concrete products but are not limited to these alone.

Goes Well With

Rebar Protective Caps

Polylok's Rebar Safety Caps provide the protection you need from protruding rebar at your construction and precast sites. They can be used to protect employees and equipment from exposed rebar, pipe, and anchor bolts. These high-quality caps are brilliant orange for excellent visibility, and fit #3 - #8 rebar. These caps provide greater protection than the Rebar Scratch Caps, but are not intended to prevent impalement.

Rebar Scratch Cap

Polylok's Rebar Scratch Caps provide the protection you need from protruding rebar at your construction or precast sites. They can be used to protect employees and equipment from exposed rebar, pipe, and anchor bolts. These high-quality caps are brilliant yellow for excellent visibility, and fit #3 - #6 rebar. Scratch Caps are meant for modest protection and do not prevent impalement.

Corner Guard

The Corner Guard is Polylok's innovative product for securing precast products for safe delivery to the site. It's features make it the most versatile corner guard ever built!

Inspection Tags

A simple and effective way to manage your quality control. This inspection tag will ensure that your product is inspected for quality, “Pre-Pour and Post-Pour”. Simply turn off and product is ready for pouring. When your product leaves your yard with our inspection tag cast in you will be confident knowing it passed all quality specifications.

Form Hammer

Designed in our pre-cast plant, this aluminum hammer will not damage your forms. The aluminum is designed to absorb the energy, leaving your forms intact.

Bearing Pads - Concrete Panel Spacers

Polylok, Inc. has developed an innovative concrete panel spacers pad that offers many improved features at a lower cost. Through our innovative design, Polylok eliminated many problems common with other concrete spacers pads. Primary applications for spacers pads are architectural concrete products but are not limited to these alone.