These super tough cribbing plates from Polylok give you stable footing on less than perfect...

These super tough cribbing plates from Polylok give you stable footing on less than perfect ground conditions. Poly Plates have a 1" lip around the outside edge to stop the outriggers from sliding off. Our Poly Plates come in 24" & 30" diameter, and is recommended that the Poly Plate surface area be at least 3 times larger than surface area of the outrigger float pad. Poly Plates are not to be used to bridge across ditches or culverts. Stop using homemade wooden pads that rot over a short period of time, and switch to Polylok's Poly Plates for ease of use and durability.

Polylok Shims are made of engineered plastic specifically formulated for use by the precast industry....

Polylok Shims are made of engineered plastic specifically formulated for use by the precast industry. This material provides optimum performance for applications where high compressive strength and load bearing are important. Available in: 1/16", 1/8", 3/16", 3/8".

The Corner Guard is Polylok's innovative product for securing precast products for safe delivery to...

The Corner Guard is Polylok's innovative product for securing precast products for safe delivery to the site. It's features make it the most versatile corner guard ever built!

Our pocket formers create a void in concrete to form a handle to make it...

Our pocket formers create a void in concrete to form a handle to make it easy for lifting concrete structures. They come in two sizes: 8"; x 2 5/8" and 6" x 1/12". They are available in rubber or urethane.

A simple and effective way to manage your quality control. This inspection tag will ensure...

A simple and effective way to manage your quality control. This inspection tag will ensure that your product is inspected for quality, “Pre-Pour and Post-Pour”. Simply turn off and product is ready for pouring. When your product leaves your yard with our inspection tag cast in you will be confident knowing it passed all quality specifications.

Designed in our pre-cast plant, this aluminum hammer will not damage your forms. The aluminum...

Designed in our pre-cast plant, this aluminum hammer will not damage your forms. The aluminum is designed to absorb the energy, leaving your forms intact.

Polylok solves the problem of anchoring attachments to your concrete forms. Our mold fastening nails...

Polylok solves the problem of anchoring attachments to your concrete forms. Our mold fastening nails allow you to simply anchor mold attachments quickly and for less cost than older, time consuming methods. Quickly attach accessories to your mold such as: pulling irons, block-outs, unistrut clips, hole formers and lighting panel couplings. Attachments can be anchored with precision every time with our mold fastening nails. Polylok’s mold fastening nails are the simplest, most economical way to anchor mold attachments. The hole will self seal allowing you to drill as many holes as needed without compromising the form integrity.

Polylok, Inc. has developed an innovative concrete panel spacers pad that offers many improved features...

Polylok, Inc. has developed an innovative concrete panel spacers pad that offers many improved features at a lower cost. Through our innovative design, Polylok eliminated many problems common with other concrete spacers pads. Primary applications for spacers pads are architectural concrete products but are not limited to these alone.

Our Man Hole lift plugs are made of resilient rubber and can be used for...

Our Man Hole lift plugs are made of resilient rubber and can be used for sizes between 2.25” – 2.5”. Perfect for vacuum testing of manholes, concrete pipe, as well as any concrete structure that is transported using steel lifting pins. Simply hammer the plug into the hole until a snug fit is achieved.

Equals and Unequals are great products for precasters looking to make consistent knockouts in their...

Equals and Unequals are great products for precasters looking to make consistent knockouts in their precast structures. These were originally designed for leaching galleys, but many of our precast customers have used them for other applications.

Polylok's industrial Lubricant (Poly-Lube) is manufactured using non-toxic, renewable raw materials so they are environmentally...

Polylok's industrial Lubricant (Poly-Lube) is manufactured using non-toxic, renewable raw materials so they are environmentally safe and biodegradable. In addition to Poly-Lube’s environmental benefits, Polylok lubricants are safe for use with all metals without fear of discoloration or damage.

Polylok';s joint sealant system is custom engineered to meet the most exacting standards of the...

Polylok';s joint sealant system is custom engineered to meet the most exacting standards of the pre-cast concrete industry. Polylok Butyl Joint Sealant remains flexible and forms a permanent bond to a wide variety of substrates including concrete, metals and plastics. Adhesion and cohesion at the time of installation are excellent, and actually improve after the joint has been formed and placed in service. This sealant is designed not to shrink, oxidize or harden and has excellent resistance to temperature extremes, acid and alkaline environments.

Polylok's Butyl Joint Sealant is designed to fully comply with current ASTM Standards and specifications as required by Federal, State and Local agencies for use by the precast concrete industry and contractors. Available in sizes: 1/2" x 21", 3/4" x 21", 1" x 21", 3/4" x 14.5", 1" x 14.5". Special sizes available upon request.

We can customize your own warning sign or you can choose from one of our...

We can customize your own warning sign or you can choose from one of our many standard signs. All of our signs are meant to last in toughest of environments. Whatever the sign you are looking for, Polylok has the one for you.