Features

• Offers over 122 linear feet of 1/16th inch filter slots
• Has a flow control ball that shuts off the flow of effluent when the filter is removed for cleanings
• Has its own gas deflector ball which deflects solids away
• Installs easily in new tanks, or retrofits in existing systems
• Comes complete with its own housing; no gluing of tees or pipe
• Rated for 1,500 GPD
• Has a modular design allowing for increased filtration
• Accepts 3'' and 4'' SCHD 40 and SDR 35 Pipe

The PL-122 Effluent Filter should operate efficiently for several years under normal conditions before requiring cleaning. It is recommended that the filter be cleaned every time the tank is pumped or at least every three years. If the installed filter contains an optional alarm, the owner will be notified by an alarm when the filter needs servicing. Servicing should be done by a certified septic tank pumper or installer.

Maintenance Instructions:

1. Locate the outlet of the septic tank.
2. Remove tank cover and pump tank if necessary.
3. Do not use plumbing when cleaning filter.
4. Pull PL-122 out of the housing.
5. Hose off filter over the septic tank. Make sure all solids fall back into septic tank.
6. Insert the filter cartridge back into the housing making sure the filter is properly aligned and completely inserted.
7. Replace septic tank cover. PL-122 Installation: Ideal for residential and commercial waste flows up to 1,500 Gallons Per Day (GPD).

Installation Instructions:

1. Locate the outlet of the septic tank.
2. Remove tank cover and pump tank if necessary.
3. Glue the filter housing to the 4" or 6" outlet pipe. If the filter is not centered under the access opening use a Polylok Extend & Lok™ or piece of pipe to center filter.
4. Insert the PL-122 filter into its housing.
5. Replace the septic tank cover.

Downloads
	PL-122 Testing Results