24" IPEX to 24" IPEX Adapter

Polylok's 24" IPEX to 24" IPEX pipe adapter is ideal for retrofitting existing septic tanks. Use Polylok's pro-grade adhesive/ sealant (PL-E6100) for a simple and secure installation. Our 24" IPEX adapter ring is made of virgin high density polyethylene.

Installation Instructions us Polylok's PL-E6100 pro-grad adhesive/ sealant:

Step 1: Check that your 24" IPEX pipe has a smooth end flat cut as possible.

Step 2: Apply Polylok pro-grade adhesive/ sealant (PL-E6100) or equivalent adhesive/ sealant to both mating surfaces. Apply adhesive/ sealant to inside wall of the IPEX pipe and on the opposing mating surface on the outside of the PL-24IPA adapter.

Step: 3 Place the PL-24IPA adapter into the IPEX pipe while the adhesive/ sealant is still wet. Give the adapter a quarter turn and hold it in place for a few moments to set it in place.

Step: 4 Repeat steps 1-3 when attaching a second piece of 24" IPEX pipe to the Polylok PL-24IPA adapter.

Installation Instructions using PVC primer and cement:

Step 1: Prime both mating surfaces with PVC primer. Apply primer to the inside wall of the IPEX pipe and on the opposing mating surface on the outside of the PL-24IPA adapter.

Step 2: Cement both mating surfaces generously with medium body PVC cement. Apply cement to the inside wall of the IPEX pipe and on the opposing mating surface on the outside of the PL-24IPA adapter.

Step: 3 Place the PL-24IPA adapter into the IPEX pipe while the PVC cement is still wet. Give the adapter a quarter turn and hold it in place for a few moments to set it in place.

Step: 4 Repeat steps 1-3 when attaching a second piece of 24" IPEX pipe to the Polylok PL-24IPA adapter.